Following success with the 60mm and 20mm wide Type 20 miniature belt conveyor we have increased the width to 120mm to fulfill customer demand.

1200mm wide x 500mm length with table top stand.

The 120mm wide Type 20 Miniature Conveyor comes in 500mm length for now until other lengths are built and tested. The weight capacity is 500gms. Side guides and stands up to 150mm stands can be supplied

These standard miniature belt conveyors are based on aluminium profiles with 5mm t-slots for easy mounting and positioning.

The Type20 miniature belt conveyor systems are versatile and extremely compact. Mini belt conveyors are used for small parts transport in automated machines with little conveyor space. These very small conveyors have small external DC motors, direct drive, at the drive end. As they are used for transporting mainly small, light parts in applications such as small parts manufacture, food, pharmaceuticals etc. The weight capacities are not high and the speeds are relatively low as standard compared to AC motor driven belt conveyors.

Speed controller has a jack plug input 24VDC 0.1A compatible with the 24VDC power supply. The method for the variable speed is PWM or pulse width modulation. The speed adjustment can only provide from 9M/min downwards because of how PWM works, The speed controller is housed in a compact plastic housing with a simple on/off/adjust knob.  

240VAC to 24VDC transformer. Converts mains electricity to 24VDC power for the Type20 miniature conveyor. Has jack plug compatible with the speed controller. Can be used without speed controller but needs to have jack plug removed and wires connected to motor terminals.

Slot nuts available for inserting into the aluminium profile so accessories and mounting plates can be fitted. In thread sizes M3, M4, M5.

Miniature conveyor for moving small parts
60mm and 20mm wide range.

  • Belt width : 19mm (20mm wide profile width) 59mm (60mm wide profile) 119mm (120mm wide profile)
  • Belt type : Blue flexible FDA as standard with positive belt tracking.
  • Length :500mm and 1000mm as standard. Other lengths are possible from 150mm and beyond the standard 1000mm but subject to application (Please contact us to discuss) and surcharge for special belt length manufacture.
  • Speed : Nominally 9M/min (Option A) & 27M/min (Option B) Under no or very low load, slower under heavier loads.
  • Motor Motor voltage 24V DC – current (no or very low load) 0.15A – max 0.42A
  • Weight capacity : Nominally up to 1kg/M but dependent on motor type selected, product and environment- please ask.

For more information please call 01772 690656 or email