Another week, another new belt design for Flexmove slat conveyors. This slat chain belt is made form the same plastic construction as the standard belt, but the EM83PC-5 belt for the FM system (83mm wide chain) has a new design where the "Teeth" of the standard belt are smoothed out. On the straight there is no visible gap and in...
slat conveyor
-
Flexmove introduce hardened steel topped chain design.
Flexmove's economy slat conveyor system now has a hardened steel topped chain for the FM series (83mm wide) slat belt. The hardened steel surface is bonded to the otherwise standard plastic slat chain. The purpose of the hardened steel surface is to help enable the chain to carry metal parts or other potentially hard or sharp products. The hardened chain... -
Flexmove slat conveyors lane adjuster large.
With Flexmove slat conveyors the individual lanes can be positioned very close to each other. When the conveyors are placed so close, it makes it much easier to transfer products from one lane on a slat conveyor to the other than for alternative types of conveyor where bearing housings and other conveyor parts get in the way. This close lane... -
Flexmove introduce driven bridge for conveyor drive ends.
Flexmove have just introduced driven bridge modules for it's range of slat conveyors. Sometimes when 2 plastic chain conveyors meet end to end there is a gap between the drive end of one slat conveyor ant the tail end of another. This is due to the larger drive and tail end sprocket diameters that these conveyors usually have. This situation...